The best way to Paint a Base Board on a Tile Floor

One of many duties that are important when you ready your house for sale to execute is beautifying your trim, including baseboards. Baseboards endure an excellent deal of wear and tear from daily visitors, animals, furniture and vacuums. A brand new coat of paint restores the exhausted-seeking base Board and aids to freshen the area. Painting base Board above a tile flooring now is easier than painting over carpeting — be sure that you totally mask several inches of tile to prevent getting paint on the ground.

Remove any steel doorstops should you be in a position to unscrew them in the wood installed in the base Board.

Sand any minor or scratches dents with medium-grit sandpaper. Smooth these places with fine-grit sandpaper.

Apply wood filler to any gouges that are big, smoothing using a putty knife. When the filler is dry, sand first with medium-grit sandpaper, then fine-grit sandpaper.

Vacuum the tile ground carefully, paying specific consideration to the the location where the ground meets the baseboard.

Fill a bucket with warm water to which you include some general purpose cleanser.

Wet a sponge in the the answer and clear the base Board. Pay specific attention. Allow the base Board to dry.

Mask all surfaces adjacent to the base Board, for example, wall as well as the tile flooring, with blue painter’s tape. Seal the edges of the tape firmly to avoid paint bleeding.

Spread a painter’s tarp over work area to avoid stray drips of paint from harming the ground.

Apply primer, using a paintbrush, to any locations that needed considerable sanding or were stuffed with wood filler.

Open a can of latex enamel and stir it carefully using a paint stick. Pour a few of the paint.

The base Board, from a a large part, with the angled sash paintbrush. Make down and up strokes with all the brush. Then operate the brush in extended, easy strokes to mix the paint. Before shifting on complete several feet of baseboard in a time.

The paint can to decide how lengthy to wait before implementing a second coat, if required.

While the paint is still-wet remove the tape.

See related